to change the license plate bulbs you need to have a flathead and phillips screwdriver. first pry off all of the little black plastic screws holding the trunk cover on, there should be 4 or 5 of them total I think, including the ones under the cover for the inner tail lights, then use a phillips screwdriver and unscrew the two bolts holding the plastic "pull" handle in place. then you need to take the trunk light off by using a flathead screwdriver and sliding it under the plastic on the right side and pushing the metal piece holding the light in. once that is finished, use the flathead screwdriver to press the three plastic tabs holding the plastic outer rim of the trunk release handle, one on the left side, front, and right side, there is also another tab on the back but once you get the first three it should pop off. once the plastic rim is off, there is another bolt that you need to unscrew with a phillips screwdriver to get the whole trunk release handle off. with all of these things removed, you should now be able to see where the bulbs are located
How do I change the license plate bulb on a 1993 Lexus ES 300
Change brake light bulbs Just remove the rear license plate. You can change the backup lights and brake light easily.
email me and I will send you a pdf on how to change the body tailight bulbs. vbdenny
you need to remove the inside panel to get to these bulbs
Bulbs can be replaced you have to get bulbs type 9006 (hb4)
no you do not
They are located inside the trunk lid, underneath the felt lining. You need to unsnap and pull back the felt lining to access the bulbs for the license plate light.
from inside the trunk pop all of the plastic rivots and you can access the bulbs from the inside..
They are located inside the trunk lid, underneath the felt lining. You need to unsnap and pull back the felt lining to access the bulbs for the license plate light.
how do you change the high mounted stop light on a lexus Is300?
Normally this happens when one of the bulbs is burnt out. Make sure all bulbs are working.
To change the license plate bulbs on a 2008 Ford Taurus, first, open the trunk and locate the license plate light assembly. Use a flathead screwdriver to gently pry off the light cover. Remove the old bulb by twisting it counterclockwise, then insert the new bulb by twisting it clockwise. Finally, replace the light cover and ensure it’s securely in place.