To change the oil on a Massey Ferguson 165, first ensure the tractor is on a level surface and the engine is cool. Start by draining the old oil by removing the drain plug from the oil pan, allowing the oil to flow into a suitable container. Replace the drain plug, then remove and replace the oil filter before filling the engine with new oil through the dipstick tube, using the recommended oil type and quantity. Finally, run the engine for a few minutes, check for leaks, and verify the oil level using the dipstick, adding more oil if necessary.
a 165 Massey-ferguson oil pan holds 8 1/2 quarts
in the oil filler hole
To change the oil in a Massey Ferguson 135 tractor refer to the books instructions. The instructions will guide you on where to drain the oil, what oil to use, and how to replace.
To add oil to a Massey Ferguson 165, locate the oil filler cap on the engine's valve cover. Remove the cap and use a funnel to pour in the appropriate type and amount of oil, as specified in the owner's manual. After filling, replace the cap securely and check the oil level using the dipstick to ensure it is within the recommended range. Always check for leaks after adding oil.
On the Massey Ferguson 165 tractor, the engine oil fill is located on the top of the engine block, typically towards the front or side. It is usually marked with an oil can symbol or labeled "Oil Fill." To access it, you may need to remove the oil filler cap to add oil during maintenance. Always ensure the tractor is on a level surface before checking or adding oil.
I suggest you call a Massey Ferguson dealer to be 100% sure.
4 1/2 quarts with filter change
for a perkins 3 cyl gas engine it is 6qts w/o filter change and 6.5 qts with oil filter change
type of oil for transmission
what kind of hydraulic oil should be used for a massey furguson 245
5 qts.
6