You can't disactivate anything...deactivate perhaps?
The 1991 Toyota Camry has an alarm system button below the steering column. The ignition must be turned on and the button pressed for 30 seconds to deactivate the alarm.
The tire pressure in a 2005 Toyota Highlander should be about 35 pounds. This model has a low pressure indicator alarm.
I have a Toyota sienna 2003 van, LED of the car alarm keeps blinking even I deactivate it to open the doors . Please tell me how to reset it? thanks Peter
To deactivate the alarm system on a 1995 Toyota Camry with the key, simply insert the key into the driver's side door lock and turn it to the unlock position. This action should disarm the alarm. If the alarm continues to sound, you can also try starting the engine with the key, which typically resets the system. If problems persist, consult the vehicle’s manual for specific instructions related to the alarm system.
Yes! For a 2007 Toyota Highlander Hybrid, at least, all it takes is the removal of one relay labelled DRL to deactivate with no ill effects. It's a five-minute job that took me almost a year to discover.
The easiest way to deactivate your 1995 Mitsubishi Eclipse alarm system is to remove the alarm fuse. The alarm fuse can be found in the fuse box.
Toyota Highlander was created in 2000.
You don't.
where is the starter in toyota highlander 2003
The 2004 Toyota Highlander is 15'5" long.
On my 96 Camry, there is a "kill" switch on the front left of the floorboard on the driver's side. If you switch it, it will deactivate the alarm. I don't know if that helps with this model though. Ignition key should be "ON" when you use the "kill" switch to de-activate .