0
What else can I help you with?
Where is the coolant drain plug on the engine block of a 2003 Honda Accord ex?
where is the coolant drain plug on the engine block of Honda ACCORD 2.4 2006
Where is the oil filter located on a 2001 Honda Accord?
It is on the rear of the engine block above the drain plug.
Where is the ac drain tube on your 1999 Honda Accord?
The 1999 Honda Accord air conditioning drain to can be located on the bottom of the air conditioner compressor. The drain to allows condensation to drain on the ground below the engine.
Where is oil drain plug on 2004 Honda accord?
Bottom of the engine on the oil pan.
Is there a drain plug on a 2000 Honda Accord gas tank is there a drain plug on a 2000 Honda Accord gas tank?
No
Where is the oil drain plug for 90 accord?
Bottom of the engine block screwed into the oil pan.
Where is the engine block drain to remove when replacing antifreeze on a '91 Honda Accord?
Gregory, to get at that drain bolt you have to get under your car. It is located slightly above the oil filter. I am planning on changing my radiator and will be doing this as well. Good luck.
Where is the drain bolt 2000 Honda Accord 4 cylinder?
The oil drain plug is located on the bottom of the engine screwed into the oil pan.
Where is the coolant drain plug on the engine block of a 1997 Honda Accord LX 4-cylinder?
The Coolant Drain Plug for a 1997 Honda Accord LX 4cyl is at the bottom of the Radiator on the left side, if you were facing the Vechiel. It if stock it looks like a Black Medal Wingnut, unless different Drain Plug was put in by previous Owner. The block drain is an 8mm plug next to the oil filer on a 94 Accord LX 2.2L. 94-97 might be the same. There is a 10mm plug near the oil filter also, but it contains oil... I know. I have tried to remove my coolant block drain plug but without success so far... It is torqued! hw
Where is automatic transmission drain plug on 2002 Honda Accord?
There is no drain plug.
What is the torque of the oil drain plug on a 1990 Honda Accord?
The correct tightening torque for a 1990 Honda Accord oil drain plug is 29 foot pounds. This same torque applies to all Honda oil drain plugs.
Where is Coolant drain on an 88 Honda Prelude?
On a 1988 Honda Prelude, the coolant drain is typically located at the bottom of the radiator. Look for a petcock or drain valve on the lower right or left side of the radiator, which can be opened to allow coolant to drain out. Additionally, you may also need to drain the engine block, which can be done via a drain plug located on the engine block itself, usually at the lower part of the engine. Always ensure the engine is cool before attempting to drain the coolant.
