Take out the VSS and fill trough the sensor hole.
It is electrical. Vehicle Speed Sensor (VSS) on top of gearbox sends signal to ECU which sends signal to gauge cluster.
You can top off the oil in the gearbox on a 206 Zest by removing the fill plug on the top of the gearbox and using a funnel to fill with oil.
how do I fill the gearbox oil on a vauxhall vectra
To top up the gearbox oil on a 2004 Vauxhall Combo van, locate the gearbox fill plug, which is typically situated on the side of the gearbox. Use a socket wrench to remove the fill plug, and ensure the vehicle is on a level surface. Use a funnel to add the appropriate type of gearbox oil until it reaches the bottom of the fill hole. Finally, replace the fill plug securely.
Filler/level plug is located at the front side of the gearbox
where is the gearbox oil fill on peugeot expert hdi 2004
This conversion is to put a h22a engine from the 4-5 generation Preludes to the 3rd generatio Prelude, this conversion is very much so do-able, but. Their are issues with clearance of the sump of the h22a in the 89 Prelude. New engine mounts need to be used, new ECU needs to be installs aswell. Also you will have to use the gearbox from the h22a. Can't use the old gearbox in your 89 Prelude. It's a big job but there are plenty of examples of great Preludes sporting the newer engines.
I believe you fill it until the oil comes out the fill plug hole.
you fill up the manual gearbox on the top through the beather nut , it has a white plastic cap on the top and use the correct oil
Down the gearbox dipstick hole. If no gearbox dipstick then system is sealed and best left to a dealership
fill through the gearbox dipstick tube until correct level achieved
How to check if there is oil in my gearbox and where does the nut sit and what kind of oil do i use