If you are talking about a small engine such as a lawn mower, the air gap between the coil and the flywheel is usually is .015 to .020 of an inch. A piece of cardboard from a cereal box can be used as a gauge if you don't have the proper gauges.
0010-0.014" and a normal business card serves as an easy to find gauge.
you can go to any parts store and buy a feeler gauge for a couple of dollars. use that to set the air gap between the coil and the flywheel. use the oem specs
To set the ignition timing on a 14.5 OHV Briggs & Stratton engine, first, remove the flywheel shroud and locate the timing key on the flywheel. Use a dial indicator to find top dead center (TDC) on the piston, then align the timing mark on the flywheel with the mark on the engine block. Adjust the position of the ignition coil if necessary, maintaining a gap of about 0.010 inches between the coil and the flywheel. Finally, reassemble all components and test the engine to ensure proper operation.
First, you have to specify what cities you want to find the distance between, and then you can find the distance between each one, and finally add all the distance together, to give you the total.
flywheel settings
To find the number of teeth on a flywheel, you can visually inspect the flywheel and count the teeth directly. If the flywheel is part of a mechanism, you may need to remove it for an accurate count. Alternatively, if the flywheel is connected to a gear system, you can often find the number of teeth specified in the equipment's technical documentation or manufacturer's specifications.
flywheel between block and trans, your starter turns it.
find the distance between the Dubai cities
how do you find distance between points
The distance between the countries can be find by travelling
ruler
The perpendicular distance is the shortest.