0
You will need to jack the front end up and make sure the jack stands are not in the way when you remove the rack and pinion. Next remove the front wheels. Disconnect the steering connection from the rack and pinion. Remove the front brakes and rotors. Remove pin the holds hub nut. Remove hub nut. Remove all bolts that hold rack and pinion. Remove nut the holds bottom control arm on either side, but you don't have to do both. You have to do this so you have enough play to slide the extensions that are connected to the rack and pinion. That should do it. Installation is the opposite. Good luck. You will need to jack the front end up and make sure the jack stands are not in the way when you remove the rack and pinion. Next remove the front wheels. Disconnect the steering connection from the rack and pinion. Remove the front brakes and rotors. Remove pin the holds hub nut. Remove hub nut. Remove all bolts that hold rack and pinion. Remove nut the holds bottom control arm on either side, but you don't have to do both. You have to do this so you have enough play to slide the extensions that are connected to the rack and pinion. That should do it. Installation is the opposite. Good luck.
What else can I help you with?
How do you fix Sunfire leaking rack and pinion?
Replace it!!
What is the average cost to fix a 2003 explorer rack and pinion?
just did mine today. aftermarket rack, $650.
How do you fix a 1995 Buick Lesabre axle?
there is no fixing you have to replace the rack and pinion
How much would it cost to fix a rack and pinion on a 1999 Ford Taurus?
Rough estimate for replacement $400. ROUGH ESTIMATE FOR RACK AND PINION IS $800 THAT IS PARTS AND LABOR.
How much would it cost to fix a rack and pinion on a 2001 ford explorer sport?
Just had Rack and pinion replaced on my 1999 Explorer, it cost $450 which included parts and labor.
How much does it cost to fix a rack and pinion on a 1997 Chevrolet lumina?
Estimate around $400
How much would it cost to fix a rack and pinion on a 2003 Ford Taurus?
Much easier and cheaper to replace the rack with a rebuilt unit than to try to fix the old one.
How much would it cost to fix a rack n pinion on a 2002 ford windstar van?
about $1100.00
How rack and pinion is used for indexing mechanism?
you need a rack and pinion nut breaker to which you fix a pinion at the free end ie where nut is placed to be cracked. This is because you need to convert reciprocating motion of the rack and pinion mechanism built in the nut cracker into circular motion. Attach the nut cracker to the collect chuck shaft through the bore of the additional pinion you installed at the free end of the cracker. When you punch the nut cracker vide its handle once it moves the pinion one tooth on the rack. Thus you can rotate ( ie give angular motion to ) the fixed workpiece from one tooth or as many teeth as you like., depending on the pitch of the threads on the rack and pinion. mazHur
How much would it cost to fix a rack and pinion in a 1997 Pontiac grand prix?
5 to 6 hundred dollars if you find an honest mechanic.....good luck with that !
How do you fix a 1992 Ford rack and pinion?
replace it.. most shops get a rebuilt unit and replace the whole unit. I would not try to rebuild one myself. good luck
What could make a 2002 Nissan Altima leak power steering fluid?
I have a 2002 Nissan Altima and under warranty thank god they had to replace the power steering rack and pinion..also have had a new engine and transmission something done with the rear end under recall..car is a lemon...it could have something to do with the rack and pinion not sure how to fix but probably the answer
