Model and serial # nomenclature is usually on page one of the installation manual. If you don`t have that, try downloading it from their website.
Mine is a 1994.
Hi I have that furnace in my house and i came across your post when i did a model number search for parts. My house was built in 1995 and the furnace was brand new then. Hope this helps.
The phone number of the Franklin Furnace Archive is: 718-398-7255.
The York Diamond 80 model number P4HUA12L06401A is a gas furnace that was commonly produced in the early 1990s. Specific manufacturing dates can vary, but many units with this model number were manufactured around 1992 to 1994. To determine the exact age of a particular unit, you may need to check the serial number, which typically contains information about the manufacturing date.
Common signs of a malfunctioning York furnace ignitor include the furnace not producing heat, frequent cycling on and off, a clicking sound when the furnace tries to ignite, and a strong smell of gas.
Just called York. I have this model, however York needed the serial number to find the SEER. Can a model have more than one SEER? I doubt it. My SEER for this model is 13.
H2CB048S06a
yes it can fan
The York model D2MPD20N08001G gas furnace has a heating capacity of approximately 80,000 BTUs. In terms of tonnage, this typically translates to around 2 to 2.5 tons of heating capacity, depending on the specific application and airflow requirements. For precise specifications, it's always best to consult the manufacturer's documentation.
Specs Toporcer was born February 9, 1899, in New York, NY, USA.
Depending on the brand of furnace and the grade of furnace, and also if it is electric or not, and who installs it, it can be anywhere from 2,000 dollars to 10,000 dollars.
The York model number YHJD24S41S4A corresponds to a unit with a cooling capacity of 2 tons. This model is part of York's line of packaged rooftop units, designed for efficient heating and cooling. If you need further specifications or details, consulting the manufacturer's documentation or website would provide the most accurate information.