Installing a passenger side airbag typically requires removing the dashboard or the airbag cover, depending on the vehicle model. First, disconnect the battery to ensure safety, then remove any necessary screws or clips to access the airbag module. Carefully replace the old airbag with the new one, ensuring proper alignment and connection of the wiring harness. Finally, reassemble the dashboard components and reconnect the battery, testing the system to ensure everything functions correctly. Always refer to the specific vehicle's service manual for detailed instructions.
The bolt to passenger side airbag on 2002 avalanche are located on the bottom of the airbag.
suburban1998
A 1994 Ram does not have a passenger side airbag.
how do you reset the passenger side airbag on a 2000 passat?
There is no passenger side airbag shut off switch in a 1998 Voyager.
== == No,the driver airbag arrived in 1990 as standard and the passenger airbag in 1994 as standard too.
Don't do that!The airbag is a safety device which can save the life of the passenger in case of an accident!However,as the Corvette is a 2-seat car,if you are talking about a child,I strongly recommend you to install an aftermarket Passenger Airbag ON-OFF switch.That is possible even for older car models.Contact a Chevrolet dealer.
You shouldn't remove the airbag and subsequently drive without a passenger side airbag. The only purpose to remove the air bag in that case is to kill the passenger. The alteration or removal of an airbag resulting in death is an act that will face criminal prosecution. My 2001 Dodge 3500 passenger side airbag can be disarmed with the key on the dash. No need to remove it.
NO.
No
A 1996 Ford Ranger could be equipped with a passenger side airbag ( SRS ) * so maybe yes and maybe no * All the 1996 Ford Ranger models have a drivers side airbag
open passenger side fusebox, locate and disconnect yellow plastic fuse harness as well as airbag fuse