0
What else can I help you with?
Is there a pilot light on a kenmore gas dryer?
Most Kenmore gas dryers do not have a traditional pilot light. Instead, they use an igniter to light the gas burner when needed. If your Kenmore gas dryer is not heating, it could be due to a faulty igniter or other heating element.
How do you light the pilot on a whirlpool gas dryer?
I don't know of any dryers that have a pilot light. They have glow plugs which glow red hot before the gas valve is opened so that the gas will ignite. If the glow plug is not working it probably has a crack and needs to be replaced. The dryer will not start without it.
Does ge gas dryer have a safety to turn off gass if power goes out?
Yes ….Your dryer, like many hot water heaters and gas ranges has a device called a "thermal coupler" This device relies on the heat from a pilot light to keep it on while there is power to the thermal relay. Now, If the thermal coupler fails or if the pilot light goes out, The relay shuts the gas off at the valve to prevent gas from filling the house. The difference between the range, heater and dryer is that the dryer has the safety built in to disable the gas for total power failure. The range and heater can still run with out electricity.
How do you light the pilot on an octopus furnace?
How do I light pilot light on furnace
How do you turn on the pilot light on a gas appliance?
To turn on the pilot light on a gas appliance, locate the pilot light button or knob and turn it to the "pilot" position. Then, press and hold the button while using a long lighter to ignite the pilot light. Keep holding the button for about 30 seconds to allow the pilot light to stay lit. If the pilot light goes out, repeat the process.
What is wrong with your dryer which has been moved in the past when the pilot light is out?
I always thought dryers were electric, but then what do I know! LOL It's best to get a gas man in or a repairman. Don't fool around with it yourself.
How do you turn on a pilot light?
To turn on a pilot light, locate the gas valve and pilot light knob on the appliance. Turn the gas valve to the "pilot" position and press down on the pilot light knob while using a lighter or match to ignite the pilot flame. Hold the knob down for a few seconds to allow the pilot light to stay lit, then release the knob.
How do you re-light the pilot light on an electric heat pump system?
Pilot light for what? There should be no pilot light on a heat pump. Is this another silly homework/exam question?
Why does the pilot light go out when the gas appliance is turned to the "on" position?
The pilot light goes out when the gas appliance is turned to the "on" position because the flow of gas is redirected from the pilot light to the main burner, causing the pilot light to extinguish.
Why does the pilot light go out?
The pilot light can go out due to a variety of reasons, such as a draft, a dirty or faulty pilot light assembly, or a lack of gas flow.
How do you start a pilot light on a gas appliance?
To start a pilot light on a gas appliance, you typically need to locate the pilot light button or knob on the appliance. Turn the knob to the pilot position and hold it down while you use a long lighter or match to ignite the pilot light. Keep holding the knob down for about 30 seconds to allow the pilot light to stay lit. If the pilot light goes out, repeat the process.
Why does the pilot light keep going out on the stove?
The pilot light on the stove may keep going out due to a dirty or clogged pilot light assembly, a faulty thermocouple, or a lack of gas flow. It is important to clean the pilot light assembly and ensure proper gas flow to prevent the pilot light from going out.
