A thermostat is not a switch it is a temperature gauge. It is powered all the time by the electronics in which it is being used.
To turn on a baseboard heater without a thermostat, you can manually adjust the temperature setting on the heater itself. Look for a dial or switch on the heater unit to control the heat output. Simply turn the dial or switch to the desired temperature to activate the heater. Keep in mind that without a thermostat, you will need to monitor the temperature and manually adjust the heater as needed to maintain a comfortable level of warmth.
sounds like problem with tstat programming.
If you have a heat pump it will be on the thermostat, if the thermostat for some reason has been changed to manually wire up emergency heat , remove the thermostat after you kill the power and connect the red wire too the green and white wire then turn the power on, you will have heat.
do the headlights come on automatically or manually, if manually turn off
To turn off the thermostat in your home, locate the power switch or button on the thermostat and simply switch it to the "off" position. This will stop the thermostat from controlling the temperature in your home.
To turn on the thermostat in your home, locate the power switch or button on the thermostat and set it to the "on" position. Then, adjust the temperature setting to your desired level.
Mine is Manually
To turn off the thermostat, locate the power switch or button on the device and switch it to the "off" position. This will stop the thermostat from controlling the temperature in your home.
To manually open a sprinkler valve, locate the valve box and remove the lid. Turn the solenoid counterclockwise to open the valve manually. Be sure to turn it back clockwise to close the valve once you are done.
The furnace may turn on when the thermostat is off due to a malfunction in the thermostat or wiring, causing it to send a signal to the furnace to turn on incorrectly. It could also be due to a short circuit or a problem with the furnace itself.
To turn on a Honeywell thermostat, locate the power switch or button on the device and press it to activate the thermostat. You may also need to adjust the temperature settings to your desired level.
To turn on a thermostat, locate the power switch or button on the device and press it to activate the heating or cooling system. Adjust the temperature setting to your desired level using the controls on the thermostat.