0
If you don't have 2 keys you'll need to call a locksmith or the dealership. Before you call the locksmith, make sure you have the four digit PIN code to your vehicle. The dealership has the PIN code and will give it to you for FREE with proof of ownership to the vehicle. The can also give you the key code which is helpful at the same time. Add a key when you already have two: 1) Insert one the programmed transponder keys into the ignition lock cylinder and turn the switch to the "ON" position 2) The key should be in the "ON" position for 5 seconds but not more than 15 seconds. Turn back to the "OFF" position. 3) Within 10 seconds, insert second programmed transponder key into the ignition and turn to the "ON" position. The VTSS ( Vehicle Theft Security System ) or Immobilizer System lamp (depending on model ) should start to flas. An audible tone will indicate the system has entered the " Programming Mode ". 4) Within 45 seconds, turn the switch to the "OFF" position. Insert the new transponder key and turn the switch to the "ON" position. After approx. 10 seconds and audible tone will sound and indicator lamp will illuminate briefly. This will let you know key has been programmed. 5) To add aditional keys, repeat steps 1 - 4.
What else can I help you with?
How do you program a dodge stratus transponder chip key?
Go to your Chrysler dealer and ask them to program it.
Our Services?
Program Transponder KeyFOB Key ReplacementLost Transponder Key24 Hour Car LocksmithTransponder Chip KeyLocal Car LocksmithIgnition JammedKey DuplicationCar Locksmith
If a 1999 Chrysler Sebring ignition switch cylinder is installed by other than a Chrysler dealership does it have to be programmed?
Yes. If you have a grey key, it has a transponder that electrically reads a chip in the key. You essentially have two locks -- one mechanical and one electrical. They both have to work to start the car. Should you go and have a generic key cut that fits the ignition, even thought the mechanical lock cylinder will turn -- the transponder won't allow the engine to fire. Any quality locksmith can program the car's transponder to match the electronic code of the key.
Auto Locked Out?
Transponder Chip Key
How do you program a 2006 Toyota Highlander Hybrid key with a transponder chip?
It's not anything you can do yourself. Any Toyota dealer or well equipped locksmith shop can "flash" the chip in the key.
How do you program a transponder key for a 2007 Toyota Camry?
You can't. Only a Toyota dealer can program the transponder key as it has a chip inside the key and has to communicate with the engine in order to start the car. Toyota dealer charges 1/2 hour of labor about $42 to program. Now the remote is easy...but not the key.
Lockout relief and transponder chip key programmings?
512-763-7365
Does a 2003 suburban have a chip in the key?
No. The suburban didn't get a transponder key until 2007.
How do you bypass the electronic chip in your key for a 99 Ford Ranger?
The easiest way to get around the Transponder Chip in your 99 Ford Ranger is to have a chip programmed and mount it under the steering column cowling close to the inductor coil on the ignition lock. That way you can use non Transponder keys to start the vehicle.
Is the Engine ECU on a 2001 Chrysler Sebring a simple plug-in to install?
If you have chip keys, the dealer will need to program the keys to the new PCM.
Does a 1991 Chrysler 5th ave new yorker have a chip in the ignition key?
No, a 1991 Chrysler New Yorker does not have chip key.
Does your 2002 Saturn Vue have a key chip?
No. Only the '07-'08 Aura, Outlook, Sky and the '06-'07 Relay use transponder chip keys
