How do you program a Toyota tarago remote key fob?

Answer 1

For the following models [Aurion GSV40, Camry ACV40, Kluger MCU28, Prado RZJ/GRJ/KZJ/KDJ 120, Rav 4 ACA33, Tarago ACR50, Tarago GSR50, Yaris NCP 90/91/93]

Key Removed from Ignition

Drivers Door open, all other doors closed

Insert key into ignition then remove it - do this twice

Close and open the drivers door twice

Insert key into the ignition then remove it

Close and open the drivers door twice

Insert the key into the ignition, then close the door

Turn the key from o to on - once to add a remote while retaining

the original codes, or twice to rewrite the original remote codes

(locks should cycle)

Press the Lock and Unlock buttons on the remote at the same time

for 1 second

Press and hold any button on the remote for 2 seconds

(locks should cycle once for correct programming, or twice if

procedure is incomplete)

To close programming, open the door of the vehicle.