To program a new key for a 2004 Toyota Caldina, you'll typically need to have two working keys. Insert one working key into the ignition and turn it to the "On" position without starting the engine. After a few seconds, turn it back to "Off" and remove the key. Repeat this process with the second working key, and then insert the new key you want to program and turn it to "On." The new key should be programmed after a few seconds, and you can test it to ensure it starts the vehicle. If you don’t have two working keys, it’s best to consult a professional locksmith or your local dealership for assistance.
how do you program key
To program a Toyota rav4 tansponder Key one must go to settings. Once in settings there is a programming button that will allow you to program the key.
Ask Toyota to give you a spare key.
You have to have the dealership program a key less entry remote for 2011 Toyota Camry.
my toyota key has been lost now how can i start my toyota land cruiser 2011 without key
You can't. Only a Toyota dealer can program the transponder key as it has a chip inside the key and has to communicate with the engine in order to start the car. Toyota dealer charges 1/2 hour of labor about $42 to program. Now the remote is easy...but not the key.
dealer only
how to program 2012 toyota fortuner
In order to program a key on a 2004 VW Passat, you need to first put the existing key in the ignition.
the dealer has to program the key, they will need the car and original key.
you need to take it to a Toyota dealer. this cannot be done without a Toyota special tool
what is the step by step process for programming a key for a 2007 Toyota camry for the lock,unlock,trunk