0
What else can I help you with?
What is the difference between hp and lp compressor?
LP Compressor PackageSource of LP gas is either from GC-16 (LP+TV) or from GC-28 (from LP Separator KO Drum). The LP gas transfer line carrying the LP+TV of GC-16 is routed to a new LP Gas Inlet Manifold, near TP-4 with pigging facilities to absorb the slamming actions of liquid slug, etc. at either end of the pipeline (namely in the vicinity of GC-16 and TP-4). The pig receiver and all other reliefs including common LP scrubber relief shall be integrated into the flare header of the GCP. The LP pig launcher relief goes to the existing flare in GC-16.The Common LP Scrubber is designed for handling liquid slug during pigging and normal operation. The scrubber is provided with automatic level control valves and collected liquids are routed to the LP Compressor Closed Drain Header.The GCP LP Compressor compresses the incoming gas from 20-60 psig to 270-300 psig and transfers the discharged gas to a 30" HP compressor suction manifold. The gas is compressed through a three-stage reciprocating compressor.HP Compressor PackageHP Gas from GC-16 is branched off through a new HP Scrubber to a new HP gas transfer line (approximate distance 3.5 KM) between GC-16 and TP-4 near GC-28. The line is equipped with pigging facility. HP gas may also come from the GC-28 HP Separator KO Drum.All sources of HP gas join in a Common HP manifold before going to the Common HP Scrubber. The HP Common Scrubber is provided with automatic level control valves and collected liquids are routed to the HP Compressor Closed Drain Header. HP Gas is routed to the HP Gas Suction Scrubber within the compressor package. The GCP HP Compressor compresses the incoming gas from suction pressure of 210-260 psig to discharge pressure of 900-1,000 psig. The gas is compressed through a three-stage reciprocating compressor.
Where do you add freon on a 1990 Mitsubishi Eclipse?
you will need to add, most likely R134a, to the low pressure side of the compressor. this will be the larger of the two hoses going to the compressor. follow the large hose back until you reack a fitting, that is you lp fill nipple.
What is the answer to puzzle 84 in Professor Layton and the Diabolical Box?
This puzzle is also known as Pancake Stacks 3 (USA) & Piles of Pancakes 3 (UK). Walk Up. Talk to Gertie, must have solved Beluga's Search Mystery. Don't waste hint coins. Step By Step Solution. LP = Left Plate MP = Middle Plate RP= Right Plate. And each Step would start with the words Move a pancake from the : 0 LP to the RP 1 LP to the MP 2 RP to the MP 3 LP to the RP 4 MP to the LP 5 MP to the RP 6 LP to the RP 7 LP to the MP 8 RP to the MP 9 RP to the LP 10 MP to the LP 11 RP to the MP 12 LP to the RP 13 LP to the MP 14 RP to the MP 15 LP to the RP 16 MP to the LP 17 MP to the RP 18 LP to the RP 19 MP to the LP 20 RP to the MP 21 RP to the LP 22 MP to the LP 23 MP to the RP 24 LP to the RP 25 LP to the MP 26 RP to the MP 27 LP to the RP 28 MP to the LP 29 MP to the RP 30 LP to the RP. Your next puzzle is puzzle number 67 Sammy's Work Week (USA) or Sammy's Working Week (UK).This answer is also correct for Professor Layton and Pandora's Box.x Please see the Related link below for a walkthrough of puzzle No 84.
What does LP stand for in LP Field?
Louisiana Pacific
What does LP stand for in Sprint Spectrum LP?
can be limited partnership
When did KZOU-LP end?
KZOU-LP ended in 2010.
When was WZPH-LP created?
WZPH-LP was created in 2002.
When was KCWG-LP created?
KCWG-LP was created in 2004.
When was WKHP-LP created?
WKHP-LP was created in 2005.
When was WVQC-LP created?
WVQC-LP was created in 2009.
When was KOTR-LP created?
KOTR-LP was created in 2006.
When was KLKS-LP created?
KLKS-LP was created in 1995.
