check your pvc. If you have alot of carbon build up in your heads this will not allow proper vetalation for the crank case. Also one more thing if it is a high milage engine you could be having blowby caused by worn piston rings and or cylinders.
you got water under the distributor cap
try the fuel pressure regulator
where is the crank sensor located on a 2005 chevy impala
The crank length measurement is important in determining the optimal fit and performance of a bicycle because it affects the rider's biomechanics and efficiency in pedaling. Choosing the right crank length can help improve power output, comfort, and reduce the risk of injury.
Chevy did not use a crank sensor on that year.
trying to locate crank shaft sencor for 1993 Chevy lumna trying to locate crank shaft sencor for 1993 Chevy lumna
a Chevy 350 crank is a Chevy 305 crank. they have the same stroke, 3.48 inches, and are interchangable. swapping between the two cranks does not change the engines displacement
Just the crank. The flywheel is neutral.
No.
On the main bearings, you should fall between .001, and .003. If it is high performance, and you are going to rev it, go .002. Looser will rev.
When measuring crank arm length for optimal performance and comfort on a bicycle, factors to consider include rider's height, leg length, riding style, and intended use of the bike. The right crank arm length can help improve pedaling efficiency and reduce strain on the knees and hips.
install 3.8 Chevy impala crank sensor passenger side , remove wheel and use pully to pull out crank shaft