Remove the panel underneath the steering wheel. The fuses are in there.
To remove the door panel on the Holden Astra, first pop off the light lens if the door has a light in the door. Then unhook the light from connector. Remove the screws holding on the armrest, door handle, and window crank if equipped.
To remove the driver's side door panel on a 2001 Holden Astra, first remove the covers for the speakers and any light lenses in the door. Then remove the door panel by inserting a screwdriver in the sides to loosen the clips.
They are in a little black plastic holder, next to the radiator and battery, on the radiator support panel.
The fuse panel on a SV6 Commodore is under the driver's side dash. It is located to the left of the steering column.
The use panel under tje steering wheel, number 6 fuse i think
To remove the door panel from a Holden Astra, start by disconnecting the negative battery terminal for safety. Next, remove any screws securing the panel, often found in the door handle area and along the bottom edge. Use a flathead screwdriver or a plastic trim tool to gently pry the panel away from the door frame, releasing any clips. Finally, disconnect any wiring harnesses for power windows or speakers before fully removing the panel.
Can you get inside the car and remove the interior panel of the door that is stuck ? If you can remove that panel you will be able to manually pull the door catch (And then open the door and have the door latch fixed properly)
Remove the inside door panel and see what has happened. Only then will you know the problem.
Passenger side kick panel
To remove the driver's side door panel on a 2003 Holden Astra SXi 2-door, start by disconnecting the negative battery terminal for safety. Next, locate and remove any screws securing the panel, typically found near the door handle and along the bottom edge. Carefully pry off the panel using a trim removal tool to avoid damaging the clips, and disconnect any electrical connectors for the window controls. Finally, lift the panel upwards to remove it completely from the door frame.
Remove the instrument panel cover retaining screws. There are four screws that need to be removed. The instrument panel light bulb's will be visible. Push the light bulb in and turn at the same time to remove the light bulb.