You have to take engine out drop it down and lift car at side.
You can get the repair manual for Mercedes Benz a160 Avantgarde 1998 at the local mechanic shops.
How many ATF Mercedes Benz A160 is Using How many ATF Mercedes Benz A160 is using
The oil filter on a Mercedes A160 is located behind the valve cover next to the fire wall. It is located in a metal cylinder with a black plastic top.
google ( mercedes-autobestanswer) details there.
How i can change the engine oil for my my mercedes benz 240c 2003?
There isn´t a one (W168). The car only has a temperature warning light.
It's under the driver's seat floor. Lift the carpet to reveal the panel.
To check the gearbox oil on a Mercedes A160, first ensure the vehicle is on a level surface and the engine is warm. Locate the transmission dipstick, usually found near the back of the engine bay, and remove it to wipe it clean. Reinsert the dipstick fully, then remove it again to check the oil level; it should be within the marked range. If necessary, add the appropriate transmission fluid through the dipstick tube or designated fill port, ensuring not to overfill.
i believe that the antenna for these cars are on the rear window - the two vertical lines that are near the window brake light.
The alternator is on the bottom-right of the engine. Jack up the right side of the car (chalk your wheels, ensure the transmission is in park, and the parking brake is set). Loosen the locknut on the alternator. Back off the tension on the belt with the tension bolt. Remove the belt and all wires attached to the unit. Remove the alternator bolt and unit.
There can be several causes for the gears in a Mercedes A160 automatic gearbox to slip and not shift up to higher gears. One of the main causes is a leak in the intake. This could be a leak from a connection, or even a case of the intake bolts not tightened enough.
Begin by removing the belt from your Mercedes-Benz alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install your new alternator.