answersLogoWhite

0

To remove the crimped lock nut on a 2002 Toyota drive shaft, first, ensure the vehicle is securely lifted and supported. Use a suitable socket and ratchet to unscrew the nut, applying penetrating oil if it's stuck. If the crimped edges are preventing it from turning, carefully use a chisel or flathead screwdriver to pry open the crimped sections to loosen the grip. Always replace the lock nut with a new one during reassembly to ensure proper function.

User Avatar

AnswerBot

3mo ago

What else can I help you with?

Related Questions

How do you replace drive shaft on 1990 Toyota Camry?

tool for drive shaft


How do you change a Fiat Doblo drive shaft?

how to remove a drive shaft on a fiat doblo


How do you remove a drive shaft in 1999 Ford Taurus?

there is no drive shaft it's front wheel drive


Dodge Durango rear drive shaft removal?

How do you remove drive shaft from a 03 durango


How do you remove broken off flexible drive shaft from weedeater?

remove head pull shaft out


How do you replace the drive shaft bushing in a 1992 Toyota Previa van?

To replace the drive shaft bushing in a 1992 Toyota Previa, start by safely lifting the vehicle and securing it on jack stands. Remove the drive shaft by unbolting it from the differential and the transmission, then slide it out. Take out the old bushing using a suitable tool, such as a bushing removal tool or a hammer and drift, and press in the new bushing. Reassemble the drive shaft by reversing the removal steps, ensuring all bolts are torqued to the manufacturer's specifications.


How do you remove front drive shaft on trx 350?

To remove the front drive shaft on a Honda TRX 350, first ensure the ATV is on a stable surface and disconnect the battery. Remove any necessary covers or components to access the drive shaft. Then, unbolt the drive shaft from the front differential and the gearbox, ensuring to note the orientation for reinstallation. Finally, gently slide the drive shaft out of its housing.


How do you remove a 1991 Toyota's left half shaft?

There is an excellent online guide to removing/replacing the Toyota's half shaft on autozone.com's site. This should help anyone replacing virtually any Toyota half shaft. Go to Repair Info - Vehicle Repair Guides and drill down to your year, make and model, Drive Train, Half Shafts.


1948 ford drive shaft infohow do you remove the shaft.?

No proper man wants to be without his shaft


How do you replace a drive shaft center support bearing on a 2006 dodge ram megacab?

You must remove the rear drive shaft section and then remove the support.


How do you disconnect the drive shaft from a 1991 Toyota 4wd truck?

Remove the bolts from any supports bearing carriers. Remove the bolts from any U-joins assenbly's and the drive shaft will fall out with a little wiggling on your part. Doing this procedure backwards can damage any attached support bearings and or carrier assemblies.


How do you remove Kubota rtv 4x4 drive shaft?

To remove the drive shaft from a Kubota RTV 4x4, start by ensuring the vehicle is on a flat surface and securely supported. Disconnect the battery and remove any protective covers or shields from the drive shaft area. Loosen and remove the bolts securing the drive shaft to the transmission and rear differential, then gently slide the drive shaft out of its connections. Always consult the owner's manual for specific instructions and torque specifications related to your model.