I am assuming you mean the dust and pollen cabin filter....I have a 2000 Odyssey and the filter is behind the glove box. You have to remove the glove box to get to it....was not difficult to do.
All other Honda's, cabin air filter is behinds the glove box, you have to remove the glove box. Just ask the parts guy, they will be happy to advise.
To remove the glove box from a 2007 Ford Explorer, first, open the glove box and locate the stops on each side. Press in on the sides to release the stops and allow the glove box to drop down. Next, remove any screws or fasteners securing it to the dashboard. Finally, disconnect any wiring if equipped with lights, and gently pull the glove box out to complete the removal.
Remove Philips screw that holds glove box on to little shock absorber thing near passenger side door while glove box is opened. Not firmly pull up on the glove box door and it should pop out it is just clipped in
how to remove my glove box
how to remove glove box in 1993 camry
In the Glove box there is a panel, remove it.
It's behind the lower glove box, real easy to change, open the glove box and empty it, next you have to remove the damper it's on the left side at the top just push clip off and slide the damper off the stud. Then just slide the stops on each side then remove them, let the glove box hang near the floor, the filter is in the blower motor, it has a drawer I. The front just slide it out replace the filter. And just put the glove box back in reverse of how it came out
Assuming it's the same as a 94 C1500, Open the glove-box, remove the screws across the top and bottom, remove the cables that support the glove-box door, remove the glove box door, remove the glove box compartment. I have a 95 K1500, you just have to squeeze the top of the glove box, clear the mount and then remove the plastic strap on the left side, and then open the glove box fully it just fall down, no need to unscrew anything.
Where & how dose one change the cabin filter for 2007 Honda odyssey?? Someone said it was behind the glove box, if so, how do you access it??
Passenger side, underneath the glove box. You have to remove a panel from the center console.
To remove the glove box from an S10 pickup, first, open the glove box and remove any contents. Next, locate the screws or bolts securing the glove box hinge and the stops; these are typically found on the sides and bottom of the glove box. Remove these fasteners using a screwdriver or socket wrench, then gently pull the glove box out of its mounting brackets. Be cautious of any wiring or clips attached to the glove box and disconnect them if necessary.