0
If there is a big nut on the fan shaft where it connects to the water pump go to Autozone and ask them to rent the water pump wrench set (you get the money back when you return the tools). The big spanner wrench goes around the four bolt heads on the water pump pulley and the other smaller wrench goes on the big nut then just unscrew the nut. If you don't have the nut on the pump shaft just remove the four bolt from the water pump the fan shaft will come off the pump.
What else can I help you with?
How do you remove fan clutch of a 1985 buick regal?
Remove the fan itself then remove the clutch from the fan
How do you remove the fan clutch on a 2001 Ford Ranger?
you have to have fan clutch wrenches
How do you replace the fan clutch on a 1999 Tahoe?
Remove the fan belt, by loosening the tensioner pulley. Remove the fan clutch with the retaining bolts. Reverse the process to install the new fan clutch.
How do you remove a fan clutch on a Chevy Tahoe?
To remove the fan clutch on a Chevy Tahoe, the upper fan shroud must first be removed. Once removed, a tool is needed to hold the clutch in place to allow for the fan to be removed. The nuts must be unscrewed on the fan in a counterclockwise rotation. Remove the nuts on all side and the fan clutch will remove.
Removing the clutch fan on a BMW 530i?
how to remove the clutch fan on the 530i bmw
How do you remove fan from 1993 ford econoline e150 4.9liter 6 cylinder?
You need to rent or buy a fan clutch removal tool kit. you need to remove the fan and clutch as one before you can separate the fan from the clutch.
How do you remove the plastic fan enclosure on a 2000 V6 Dakota?
remove the fan clutch and fan first
How do you replace a fan clutch on a 2003 Ford Explorer?
How to remove fan clutch on 2003 ford explorer
How do you remove radiator fan and clutch on 1998 silverado 5.7 liter?
To remove the radiator fan and clutch on a 1998 Silverado 5.7 liter, first disconnect the negative battery cable to prevent electrical shorts. Then, remove the fan shroud for better access, if necessary. Use a wrench or a fan clutch tool to loosen and remove the fan clutch by turning it counterclockwise. Finally, lift the fan assembly out of the engine bay.
How do you get the fan off a duramax?
To remove the fan from a Duramax engine, first, disconnect the battery and drain the coolant. Next, unbolt the fan shroud and remove it to access the fan. Use a suitable fan clutch tool to loosen and remove the fan clutch from the water pump. Finally, carefully pull the fan off the clutch and set it aside.
How do you remove the radiator fan clutch on 1994 Mazda B-4000 truck?
how do you remove the fan clutch on a 1994 mazda b 4000 4.0
How do you change fan clutch on 3500 ram 5.9L does it take a fan clutch tool?
Yes it takes a 36mm wrench and a holder for the pulley to remove the fan clutch,
