Use a 5.5 mm socket to remove the three bolts in the panel under the dash, then remove the 2 bolts out of the blower resistor. Disconnect the wire connector, then remove the resistor.
You can probably just replace the muffler
Thecolorcode of 2.2 ohms resistor is red red yellow silver.
They didn't come in silver and red together, but they did come as two car colors (Chevrolet called them Inca silver and Vatican red).
what is a room heater
Silver ado.
A 0.1 ohm resistor is color coded brown (1) black(0) silver (x 10-2).
Lead is less reactive than silver on the reactivity series, so lead will not replace silver in a single displacement reaction. Silver will stay as it is in the reaction.
When a resistor has a 4th color band, its color is either gold or silver, so I will assume the color bands are white-white-white-gold. The resistance is 99 GΩ ± 5%.
copper will replace silver in silver nitratesolution will precipitate silver and oxidize copper turning to copper nitrate
yes it does.
The value of a resistor with color bands brown, black, black, silver, and brown is calculated as follows: The first two bands (brown and black) represent the digits 1 and 0, giving a base value of 10. The third band (black) indicates a multiplier of 1 (10^0). The fourth band (silver) signifies a tolerance of ±10%. Thus, the resistor has a nominal value of 10 ohms with a tolerance of ±10%.
15 k ohms with a 10% tolerance.