To replace the alternator belt on a Rover 200, first, ensure the engine is off and cool. Loosen the tensioner by using a wrench on the tensioner pulley bolt to relieve tension on the belt. Remove the old belt from the pulleys and install the new belt, ensuring it follows the correct routing. Finally, adjust the tensioner to apply the proper tension to the new belt before securely tightening all bolts.
To replace the alternator belt on a 1991 Dodge Colt 200, first, ensure the engine is off and cool. Loosen the alternator mounting bolts and the tensioner pulley to relieve tension on the belt. Remove the old belt and install the new one, ensuring it fits properly around the pulleys. Finally, adjust the tension on the belt before tightening the alternator bolts back into place.
If it's the 2ltr diesel it has an automatic spring loaded tensioner mounted down below the alternator. A bit tight for space down there if you need to change it.
Take it to a mechanic.... use a 12 mm extended ratchet to loosen the accessory belt tensioner (remove belt) Unbolt the alternator from the engine chassis and unplug the positive and negative terminals. New Alternator Costs about $200, New Starter Costs the Same.
About 200 bucks. Its about 80 to 130 bucks for the alternator, and its really easy to replace. Sits on top of the motor.
This will vary based on where you choose to get the replacement alternator. The alternator will orbably run you around $200. The cost of labor for the repair will be additional.
where is the speed sensor on a rover 200
Actual Price of Alternator - $200 Cost of a repair shop - $400+
The estimate to replace/repair the head gasket on a Rover 45 starts at 200 British pounds, plus VAT. As of October 2014, this is equal to $321.45 in US currency.
With a Bosch rebuilt which is guaranteed, (shop around) and about $150-200 Samoans, labor is about two hours from a good mechanic, here in Maine we get it done about $280.00 total. VVVVVVVVVVVVVroooooooooooommmmmmmmmmmm!!!!!!!!!
it means the belt is slipping, its a very easy fix, and not expensive (i dont think it is more than like 40 dollars at the max)...just take it to a reputable mechanic, like Firestone or something and they will replace the belt and that should solve your problem. The belt slipping means that the belt is getting old and worn out, so you should replace it soon, because if it breaks, it could cause engine damage, which could cost way more than a new belt.
To change the fan belt on a Land Rover Discovery 200 TDI, first, ensure the engine is off and cool. Release tension from the belt by using a wrench to turn the tensioner pulley, then remove the old belt from the pulleys. Install the new belt by following the correct routing path indicated in the vehicle's manual, ensuring it sits properly on all pulleys. Finally, reapply tension to the belt before starting the engine to check for proper alignment and function.
The cost to replace a timing belt can vary from $60 to $200+. The cost depends on shop prices if it will be done in a shop, the brand and price of the belt.