* Disconnect the negative battery cable.If the vehicle is equipped with a delco loc 2 or theftlock audio system make sure to have the activation code before disconnecting the battery. * Remove the drivebelt * Label and detach the wires from the backside of the alternator * Remove the mounting bolts and separate the alternator from the engine
Remove serpentine belt. Remove alternator. The bolts that hold the tensioner on are under the alternator.
To replace the alternator on a 1995 Honda Civic disconnect the battery. Disconnect the wiring from the alternator. Loosen the adjustment bracket so the belt has slack. Remove the alternator belt along with the mounting hardware. Pull the alternator and replace it.
Begin by removing the 2003 Chevy Cavalier alternator belt. Remove the wiring from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install your new alternator.
Remove the belt from your 2002 Chevy Cavalier alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install your new alternator.
you have to loosen the top alternator bolt alowing the alternator to swing forward loosening the belt
The 1995 Infinity alternator can be replaced by removing the alternator belt. Removing the wiring harness from the back of the alternator. Removing the alternator retaining bolts. Put the new alternator on and reverse the process.
how do you replace 1997 alternator belt
Remove the serpentine belt and remove the alternator. The belt tensioner bolts are under the alternator.
Generally you don't tighten the alternator, you just make sure the belt tensioner is functioning properly. Sometimes the springs of the tensioner wears out or breaks.
To replace the alternator belt on a Citroen Berlingo, you have to locate the tensioner. You can loosen it to replace it.
I think it has a serpentine belt,at least mine does You can put a 15mm wrench on the tensioner and pull it toward you, the belt will slide right off.
BeltsYes, you must remove all of the belts to replace the alternator belt. The compressor belt first, then the power steering belt then the alternator belt.