To replace a convertible top cylinder, first, ensure the car is safely parked and the top is fully closed. Disconnect the battery to prevent any electrical issues, then locate the cylinder, usually found near the rear of the convertible top mechanism. Remove any mounting bolts or clips securing the cylinder, disconnect the hydraulic lines, and carefully extract the old cylinder. Install the new cylinder by reversing the process, ensuring all connections are secure before reconnecting the battery and testing the top operation.
There is no definite time that you need to replace a convertible top. If it is properly maintained then it can last for many years.
Replace the convertible door seal.
I have successfully replaced a convertible top on my 95 mustang and published an article on how to do it. See the link below.
as hard a dick on viagra
Take it to a professional. This is not a DIY job.
The fluid cylinder for the convertible top on a 1991 Ford Mustang is typically located in the trunk area, near the driver's side. It is part of the hydraulic system that operates the convertible top. You'll need to access the trunk and possibly remove some trim or covers to reach it. Make sure to check the fluid level and connections if you're experiencing issues with the top operation.
About $ 500.00 for the top and arround $ 200.00 for the head linear + Labor
The coil for the four cylinder is on the top of the valve cover. The coil on the six cylinder is inside the distributor.
u will need a new hole top =( srry
use a real mechanic queer
The colors are your choise.
In a VW Cabrio, the convertible top fuse is typically located in the fuse box, which is usually found under the dashboard on the driver's side or in the engine compartment. To find the exact fuse, refer to the owner's manual for the specific fuse number and description related to the convertible top. Make sure to check the fuse and replace it if it's blown to ensure proper operation of the convertible top.