To replace the evaporator core on a 2002 Tacoma, start by disconnecting the battery and draining the refrigerant from the AC system. Remove the dashboard and the HVAC unit to access the evaporator core. Detach the core from the housing, replace it with the new unit, and reassemble everything in reverse order. Finally, recharge the AC system and test for leaks to ensure proper functionality.
I was quoted 6 hours of labor... on a 2002 Tribute.
In order to change the evaporator in Pt Cruiser, the entire dash has to be removed, then replace the evaporator, and reinstall the complete dash.
behind the glove box
The AC compressor fuse on a 2001 Toyota Tacoma 3.4 liter is located within the r A/C Evaporator Core.
how to take a evaorator out of a 1997 pontiac trans am
get good insurance and take it for a swim and get a real car.
no , the heater core is for your heat , the evaporator core is for your air conditioning ( cooling )
To replace the evaporator core in a Ford Ranger, first, disconnect the battery and remove the dashboard and any components obstructing access to the heater box. Drain the coolant and remove the hoses connected to the evaporator core. Once the heater box is accessible, unscrew and remove the old evaporator core, then install the new one in the reverse order, ensuring all connections are secure and there are no leaks before reassembling the dashboard. Finally, refill the coolant and reconnect the battery.
The entire, and I mean ENTIRE front dash has to come out to remove the heater box which then must be disassembled in order to replace the evaporator or heater core. Not a job for the feint of heart.
To replace the AC evaporator core in a Chevy Venture, start by disconnecting the battery and removing the dashboard to access the HVAC unit. Then, drain the refrigerant and remove the necessary components, including the blower motor and any ductwork. Once you can access the evaporator core, unbolt and remove it, then install the new core and reassemble everything in reverse order. Finally, recharge the AC system with refrigerant and test it for proper operation.
The expansion valve is located in the lines connecting the evaporator core which is located inside the evaporator housing behind the dash and the glove box.
a shop is costing me 1100.00 to replace little to much i think.