To replace the bulbs behind the clock in a Vauxhall Zafira, first, ensure the vehicle is turned off and disconnect the battery for safety. Remove the trim panel surrounding the dashboard using a trim tool, then unscrew or unclip the clock assembly. Gently pull out the clock unit, and replace the burnt-out bulbs with new ones. Reassemble the clock and trim panel, reconnect the battery, and test the new bulbs.
remove dashboard and replace 2 bulbs behind it
Exact instructions vary depending on the bulb in question.
the bulb has 2 filaments. One may not be working. Try replacing the bulbs. Or, there is a bare section on the wires that lead to the bulb.
There is a bloke on eBay who sells booklets. A step by step procedure on how to decimantle the dash and put the new bulbs in. He also supplies 4 bulbs. It's about �7.99.
To replace the bulbs in the center console of a 2010 Vauxhall Corsa, first, ensure the vehicle is turned off and the keys are removed. Carefully pry off the trim surrounding the center console using a flat tool to avoid damage. Once the trim is removed, locate the bulb holders, twist them counterclockwise to release, and replace the old bulbs with new ones. Finally, reassemble the trim by pressing it back into place.
i would suggest that you go and buy a Haynes workshop manual from Halfords as it tells you what to do and has pictures that help, i have changed the bulbs on my vectra and without the book i would not have had any idea where to start.
To replace the bulbs in the tailgate of a Vauxhall Vectra Estate, first, open the tailgate and locate the access panel on the inside. Remove the screws or clips securing the panel, then gently pry it off to expose the bulb holders. Twist the bulb holder counterclockwise to remove it, replace the old bulb with a new one, and reassemble the panel by reversing the steps. Always ensure the new bulb is the correct type for your specific model.
You need to remove the dash in order to get back there to replace any blown bulbs.
pull the dash clusture and remove bulb locks behind it
Take old bulb out, put new bulb in. Simples!
t5 bulb
The bulbs are replaceable behind the lens, so the lens (two screws for the front and 4 for the back) must be removed to change the bulbs.