It's between the engine and transmission. The only way to disconnect it from the crankshaft is to remove either the engine or transmission... or both.
with a torque wrench
Need to know the model and wheel base.
Remove the retaining ring from the top of your 1979 Chevrolet C 10 pickup truck ignition switch. Slide the ignition switch out and remove the wiring harness.
It is mounted under the drivers side of the truck in the frame rail.
get under the truck disconnect hoses unmounted old fuel pump...mount new pump reconnect hoses.
In 1979, the price of a Chevrolet pickup truck typically ranged from approximately $5,000 to $7,000, depending on the model and options selected. This was a time when trucks were becoming increasingly popular for both work and personal use, leading to a variety of configurations and features. The price could vary significantly based on factors such as engine size, trim level, and additional features.
You can find a 1979 Chevrolet Camaro belt diagram at most Chevrolet dealerships. The belt diagram can also be found in Chevrolet service manuals.
Yes it will. But you will need to know if the 454 requires a flywheel that is either internal or external balanced.
Shift pattern is as follows, from the front of the truck to the back: 2H 4H N 4L
175
This can be caused by a worn flywheel, or a bad starter drive. You'll need to remove the starter and look at the flywheel to see which is bad.
try a fuel filter change first