answersLogoWhite

0

TO replace a thermostat, begin by draining the coolant completely from the engine. You can flush out the system with water at this point if you like. Next, locate your thermostat housing and remove the hose from it that goes to the radiator. Then remove the housing and take out the thermostat, it should just pop out. Clean the surfaces around where the thermostat goes and put the new one in. Replace the housing gasket and re-install it. Next put the radiator house back on the housing using a new clip. Now add coolant to the radiator until it is full, but be aware that you will need to add more as you start the engine and the system is filled. add more coolant until the level reaches the top of the radiator, and just barely starts to overflow into the resivior. Wait for all the bubbles to stop before putting the radiator cap back on before ti gets to warm. Check for leaks.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How do you replace the thermostat located on a Mazda truck?

how do replace the thermostat on a 1999 mazda b2500 truck?


How do you replace the thermostat located on a 1999 Mazda 626 V6 and show a diagrahm?

it is the same for all Mazda with a v6


Where is the thermostat located on a 1999 Mazda 626?

Where is the thermostat located on a 1999 Mazda 626?


Where is thermostat located in 2001 Mazda mpv?

Where is the thermostat located in a 2001 Mazda mpv


How do you replace the thermostat on a 2003 Mazda Protege ES 2.0?

how to replace the thermostat on a 2003 Mazda protege es 2.0


Where do you place and install the thermostat in a 1995 Mazda b2300?

how du you replace a thermostat in Mazda pickup b2300 94


How do you change thermostat 2002 Mazda 626 V6 2.5L?

Where is the thermostat located on a mazda 626 2002


Where is the thermostat located on a 1993 Mazda mx6?

Under the thermostat housing


How do you fix a sagging driver door on a 1994 Mazda Navajo?

Replace hinges.


How do you replace the thermostat located on a 1997 Mazda b2300?

stand at the front of the car and look for the top rad hose and follow it to the end there should be two bolts holding the hosing unbolt and replace the thermostat and gasket


Where is the thermostat located on a 2004 Mazda 3?

On a 2004 Mazda 3, the thermostat is located in the engine compartment, specifically at the junction of the upper radiator hose and the engine block. To access it, you typically need to remove the upper radiator hose and the thermostat housing. It's important to ensure the engine is cool before attempting to replace or inspect the thermostat to avoid burns.


How do you replace driver side back window it is located in the hatch part the truck it is a 1991 Mazda Navajo?

smash the window and then put a new one in simple