Very tricky indeed ! Without the proper tools don't try it ! Remove the air filter housing. With the right tools you can now get to the 2 t-stat housing bolts. Remove the bolts and slide it out. Remove old t-stat and install new one(taking care to make sure it is positioned the correct way), re-install using gasket sealer !!! Note: easier said than done !
The 1993 Oldsmobile Cutlass Sierra thermostat is located on the front of the engine. You can follow the water supply line from the radiator to the thermostat housing.
On the 3.3L V6 it is under the radiator cap.
can i reset it or replace it ,where is it on the car
On a 1989 Oldsmobile Cutlass Ciera with a 3.3-liter V6 engine, the thermostat is located on the engine block at the end of the upper radiator hose. To access it, you'll need to remove the hose from the thermostat housing. Once the housing is exposed, you can unscrew it to replace the thermostat. Make sure to allow the engine to cool before starting this process to avoid burns.
Yes, you do.
Where is the signal flasher located on a 1987 Oldsmobile Cutlass Ciera?
follow the top radiator hose where it goes back to the egine
how do you replace the headlight switch on a 1993 cutlas ceria*
what is the oxygen sensor location on a 1993 oldsmobile cutlass ciera 3.3l v6
How do you change the heater core on a 1989 Oldsmobile Cutlass Ciera? or where can I get the Info on replaceing it
where is the knock sensor located on 93 cutlass ciera
On a 1989 Oldsmobile Cutlass Ciera with a 3.3L motor, the thermostat is located near the engine block, typically at the end of the upper radiator hose. To access it, follow the upper hose to where it connects to the engine, which is where the thermostat housing is situated. You'll need to remove the housing to replace the thermostat. Make sure to allow the engine to cool and drain some coolant before starting the procedure.