... I am wondering the same thing. I need to replace mine in a '96. ... I am wondering the same thing. I need to replace mine in a '96.
its connected to the windshield washer jug
Remove the wiring harness from the back of your 1993 Mercury Villager windshield washer motor pump. Remove the windshield washer pump hoses. Remove the windshield washer pump retaining bolts. Reverse the process to install your new windshield washer motor pump.
The windshield washer motor is located on the passenger side firewall
The windshield washer motor is mounted nside the windshield washer resovoir, you will see the electrical plug going to it towards the bottom.
Very Carefully
My Question is:How do you AsembleandDisassenbleAWindshield washer motorfor a1991 Chevy S-10?Is there a Diagram Available on line?Thanks a lot
To replace the windshield washer motor on a 2003 Honda Element, first, ensure the vehicle is off and disconnect the battery. Remove the windshield wiper assembly by taking out the necessary screws and lifting it off. Next, access the washer motor located near the reservoir, disconnect the wiring harness, and remove the motor by unscrewing it from the reservoir. Install the new motor by reversing these steps, reconnecting the wiring, and testing the system before reassembling the wiper assembly.
Check either at the bottom of the windshield washer fluid reservoir or check to see if the wiper motor has washer hoses connected to it
The windshield washer pump is inside the wiper motor and serviced separately.
It could be the windscreen washer motor
This is pretty easy.The pump is located at the bottom of the windshield wiper reservoir. You have to take the tube off of the side of the motor and then disconnect the motor from the bottom of the pump.
It may be that the pump has quit. Have someone get in the vehicle and hit the washer and listen at the bottle for the pump motor to work. If nothing, replace pump motor.