To reset your maintenance reminder system (even if the light hasn't come on yet), you'll need to turn your key to on (but don't start!) and make sure your odometer is on TRIP A. Then key off. Press and hold the Odometer/Trip button. While holding down on the button, key the ignition to on (Don't start the engine!) The display panel will count down from "------" to "-"Continue pressing the button until the Trip A is displayed. After this step, you are done.
This answer is close but not exactly right. The odometer needs to be on your main odometer, not the trip odometer. Then it works just as stated above.
change the oil
reset oil chang light of 2006 BMW 750li
In order to reset the oil change light on a 2006 Hyundai Tuscan you need to take the car to the dealership or your local oil changing station.
How do you remove the light housing for a 2006 scion xb
check the owners manual. if you have one with the nav display in the center of the dash you will reset it through there. There is no oil change light in the instrument cluster.
That info can be found in the owners manual.
It means its time for an oil change. Can be reset by pushing the trip button until its on ODO. then hold the trip button, turn off the car and turn key to the on position without starting the car, then releasing the trip button. should reset from there.
Hold in the odometer knob (the one that you use to track your mileage) while you turn the key on then off and back on again, and the light should go off.
How do I reset the differential light on my 2006 Nissan Titan truck? Light came on while driving, and I cannot find out how to reset light.
To turn off the maintenance light for a 2006 Scion xB, first, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds, then turn the ignition off. Finally, turn the ignition back on to verify that the maintenance light has reset. If it remains on, repeat the process.
How do you reset change oil indecator for caprice 2006?
The oil change light on a 2006 BMW 330i is reset by turning the key, pressing the trip button, and then the DC button on the turn indicator. The left scroll button is then used to select the oil light and the DC button held until it clears.