throw it awy and buy a new one
5w30
how do you reset the check engine light on a 2005 Toyota tundra
The check engine light has nothing to due with an oil change.
Resetting the oil light on a Toyota Corolla Verso is very easy to do. You just need to take the battery cables off the battery for a few minutes and then put them back on. This will reset the oil change light.
On the super monitor on dash hold right button to reset
To reset the oil change light on a Toyota Highlander 2012, switch the engine to the OFF position. Then switch the engine back on while pressing the trip meter reset button until it displays 000000 or says COMPLETE.
It probably needs to be reset after the oil change. New vehicles use the oil light to let you know you need to change the oil, but they need to be reset at the time of the change.
First you need to go and change the oil. Then you will be able to hold in the button on your screen to get it changed.
how to reset oil timing on 1990 toyota
To reset the oil change light on a 2007 Toyota Sequoia, first turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After doing this, turn off the ignition, then start the engine to ensure the oil change light has been reset. If the light remains on, repeat the process.
Here is the link on how to reset and change engine oil on 08 tundra ( http://www.tundraheadquarters.com/documents/toyota-tundra-5-7-liter-oil-change.pdf )
To reset the oil change indicator on a 2014 Toyota Camry, start by turning the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After that, turn the ignition off and then start the engine to ensure the oil change light has been reset. If it doesn't reset, repeat the process.