whats mean dtc P1700 on zafira Z18XE.thanks
whats mean dtc P1700 on zafira Z18XE.thanks
'Engine Airbag Code Reset Tool Vauxhall Meriva Zafira
Reset the exhaust emission warning light by turning the ignition on and off 40 times. Light codes can be read by the old brake/accelerator press and turn the ignition on.
Disconnect the battery for 10 minutes.
To reset the inspection (insp) light on a Vauxhall Zafira, turn on the ignition without starting the engine. Press the gas pedal three times within five seconds. Then, turn off the ignition and restart the engine to ensure the inspection light is reset. If the light persists, consult the vehicle's manual or visit a professional.
To reset the brake pad warning light on a Vauxhall Zafira, first ensure that the brake pads are in good condition and properly installed. Then, turn the ignition to the "on" position without starting the engine. Press the accelerator pedal fully three times within five seconds. This should reset the warning light; if it remains on, check for any underlying issues with the braking system.
In order to reset the immobilizer on a Vauxhall Zafira 16v auto, first switch on the car's ignition. Then, press any of the buttons on the keyfob while the car is still in the ignite position, which will reset the immobilizer. At this point, if the car's immobilizer has been reset, it will perform the lock/unlock sequence.
1. TURN IGNITION OFF 2. HOLD TRP COMPUTER RESET IN 3. TURN IGNITION ON 4. STILL HOLDING TRIP RESET, WAIT FOR THREE DASHES ON THE DISPLAY 5. TURN OFF IGNITION. 6. RELEASE TRIP RESET. 7. TURN ON IGNICION TO CONFIRM SERVICE LIGHT HAS GONE OUT.
You don't!
Car due a service? It will need to be reset by a main dealer
hold milage reset button in and switch on ignition.hold for about 5 seconds and it will reset.
Just press the trip reset button