0
open the doors with the key
turn the key on but not try to start
wait for the alarm to stop
the immo light on the dash should go out your free to start and drive
good time to change the battery in your key
if you lock the doors with the key it will arm the security system and you must turn it off with the key
What else can I help you with?
Where is the engine immobiliser reset located on a 2003 hyundai santa fe?
On a 2003 Hyundai Santa Fe, the engine immobiliser reset is typically located in the fuse box under the dashboard on the driver's side. You can check for a specific fuse related to the immobiliser and replace it if necessary. Additionally, the immobiliser may reset itself after disconnecting and reconnecting the vehicle's battery. For precise instructions, it's always best to consult the vehicle's owner manual.
How do you reset a immobiliser on a Hyundai excel 1994 model?
To reset the immobiliser on a 1994 Hyundai Excel, first ensure that you have the correct key for the vehicle. Insert the key into the ignition and turn it to the "On" position without starting the engine. Leave it in this position for about 10 minutes until the security light turns off, then turn the key to the "Off" position and back to "On" again. This process should reset the immobiliser, allowing you to start the car. If issues persist, consult a professional mechanic or the vehicle's manual for further assistance.
How do you Reset the immobiliser on my mondeo estate?
To reset the immobiliser on a Ford Mondeo Estate, first ensure that you have the correct key fob. Insert the key into the ignition and turn it to the "On" position without starting the engine, then turn it back to "Off" within 10 seconds. Repeat this process three times, ending with the key in the "On" position. Finally, turn the key to "Off" and try starting the engine; this should reset the immobiliser. If issues persist, consult your vehicle's manual or a professional.
How do you reset electric immobiliser on xsara picasso?
i have had a new battery in my key fob, but it wont turn the engine on, do i have to get it tuned in to the electrics.?
Reset check engine light on a Hyundai elantra?
The check engine light, on your Hyundai Elantra can be reset by removing the fuse. Keep the fuse out for 10 seconds and replace it to its slot.
How do you reset an immobiliser on a 1997 opel astra?
To reset the immobiliser on a 1997 Opel Astra, first ensure that you have the correct key for the vehicle. Insert the key into the ignition and turn it to the "ON" position without starting the engine, and leave it there for about 10 minutes. After this period, turn the key back to the "OFF" position, then try starting the engine. If the immobiliser continues to activate, you may need to consult a professional or refer to the vehicle’s manual for specific troubleshooting steps.
How do you reset immobiliser on Peugeot 106?
To reset the immobiliser on a Peugeot 106, you typically need to use the vehicle's key. Insert the key into the ignition and turn it to the "On" position without starting the engine. Leave it in this position for about 10 minutes until the immobiliser light on the dashboard turns off, then turn the ignition off and remove the key. If the issue persists, consult your vehicle's manual or a professional mechanic for further assistance.
How do you reset the check engine light on a Hyundai?
you disconnect the battery for a couple minutes.
How do you reset check engine light on 2004 Hyundai Getz?
P 0172
How do reset fuel check engine light on a 2004 Hyundai sonata?
It appears that if you disconnect the battery for 5 seconds you get your reset.
How do you reset immobiliser in vectra gts 1.8 petrol?
To reset the immobiliser in a Vauxhall Vectra GTS 1.8 petrol, you typically need to use the key fob. Insert the key into the ignition and turn it to the "On" position without starting the engine. Leave it in this position for about 10-15 minutes until the immobiliser light goes out, then turn the key off and attempt to start the vehicle. If this does not work, consult the owner's manual or a professional technician for further assistance.
How to reset Ford Galaxy immobiliser?
To reset the immobiliser on a Ford Galaxy, first, ensure that you have the correct key fob. Insert the key into the ignition and turn it to the "ON" position without starting the engine. Leave it in this position for about 10 minutes until the security light on the dashboard goes out. Afterward, turn the key to the "OFF" position, and then try starting the engine. If issues persist, consult a professional or refer to the owner's manual for specific instructions.
