answersLogoWhite

0

To reset the oil life on a Mercury Montego, turn the ignition to the "On" position without starting the engine. Press the accelerator pedal three times within five seconds. This should reset the oil life indicator on the dashboard. If the indicator doesn't reset, repeat the process to ensure it was done correctly.

User Avatar

AnswerBot

2mo ago

What else can I help you with?

Related Questions

How do you reset oil on 2007 Mercury Montego?

How do you reset the oil life light on Mercury Mariner? Dealer didn;t reset at oil change & we are out of state now. Thanks


Reset oil life on 2008 Mercury mariner?

To reset the oil life on a 2008 Mercury Mariner, turn the ignition to the "On" position without starting the engine. Press the accelerator pedal three times fully within five seconds. Then, turn the ignition off and start the engine to ensure the oil life indicator has been reset. If successful, the oil life display should show 100%.


2007 Mercury Milan light says oil life o change oil how do you reset?

Turn the ignition to run (one position before starting engine). Press and release SETUP to display "OIL LIFE xxx% HOLD RESET = NEW". Press and hold RESET for 2 seconds and then release to reset oil life to 100%. Turn ignition off and then start engine to verify the indicator has been reset.


What may happen if you reset oil life?

If you reset oil life without changing the oil you will throw it off schedule.


Oil Life Reset?

Reset vw beattle


How do you reset the Oil Life on 2008 Mercury Sable?

The most reliable source of these instructions will be in the Owners Manual. See "Related Questions" below for links to free manual downloads for Ford/Mercury products.


How do you reset the 'change oil' message on a 2007 Mercury Monterey?

Read the Manual


How do you reset computer after oil change ford escape XLT?

press the setup button until it switches to life, then press reset, if the oil life is already up press reset first then press setup until it switches to oil life, then reset again


How do you reset oil life on 07 infiniti m45?

To reset the oil life on a 2007 Infiniti M45, first turn the ignition to the "ON" position without starting the engine. Then, press the "Info" button on the steering wheel until you see the "Maintenance" menu. Select "Engine Oil" and then choose "Reset" to confirm the reset of the oil life indicator. Finally, turn off the ignition, and the oil life should be reset.


How do you reset your change oil light 1994 car went from saying how much oil life left to change engine oil and every since you haven't been able to reset the indicator the holding reset doesn't work?

The GM Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a CHANGE OIL message being turned on, reset the system. Always reset the engine oil life to 100% after every oil change. It will not reset itself. To reset the CHANGE OIL message, do the following: 1. Press reset stem till it Displays "OIL LIFE" on the DIC.(3 times) 2. Press and hold the reset stem. The oil life will change to 100% and a beep will sound. 3. Turn the key to LOCK. If the CHANGE OIL message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure. Hope This Helps.


How do you reset reset oil on hummer?

Press the fuel button until engine oil life appears on screen. Press and hold select button for five seconds. Oil life reset will appear on screen for 10 seconds. The system is then reset.


How do you reset the oil change warning on 2007 mercury Mountaineer?

By resting it on the computer manually