Press "MODE" for 5 seconds, then when flashing, press "SET" till you get right time.
If sensor is good will reset itself if proper air pressure in a few miles
Under the clock you will see 4 buttons. (Mode, down arrow, up arrow, and reset) 1. Hold Mode and Reset down until the display changes to *LL2 2. Then, press Mode once. This will make the clock blink. 3. Use arrow keys to change hours and minutes. 4. Hit Mode, and the clock will save.
85min wait
Radio presets and the clock.
You need to charge or replace your battery
To reset the Ajanta Digital Clock ODC-70, locate the reset button, typically found on the back or bottom of the clock. Press and hold this button for a few seconds until the display resets. You may then need to set the time and date according to the manufacturer's instructions. If there is no reset button, try unplugging the clock for a minute and then plugging it back in.
To reset the Tire Pressure Monitoring System (TPMS) on a Lexus GX470, first, ensure that all tire pressures are set to the recommended levels. Next, turn the ignition to the "ON" position without starting the engine. Press and hold the TPMS reset button, typically located beneath the steering column, until the TPMS warning light blinks three times. Finally, release the button and start the engine; the system should now be reset.
assuming this is the digital clock, you hit the clock button on the dash, followed by the reset button followed by the clock button. at this point, you should be able to hit the clock button to advance numbers, and the reset button to change the numbers you are setting. if its the analog clock, pull on the knob and turn it
To reset the VSC (Vehicle Stability Control) indicator on a Lexus GX470, start by turning the ignition to the "ON" position without starting the engine. Press the brake pedal and then press the "VSC" button located on the dashboard until the indicator light turns off. If the light remains on, you may need to check for any underlying issues or take the vehicle to a mechanic for diagnostics. Always consult the vehicle's manual for specific instructions related to your model.
I would unplug the battery. This will reset your clock, etc., but it should turn the light off.
how do you reset the clock on a 2005 Honda accord how do you reset the clock on a 2005 Honda accord
To reset the digital clock in a Ford Freestar, turn on the ignition without starting the engine. Press and hold the "Clock" or "H" button until the hours begin to flash, then use the "H" button to set the hour. Press the "M" button to switch to minutes, and adjust using the "M" button as well. Once the correct time is set, press the "Clock" button again to save the settings.