To set the clock on a 2007 Citroen Jumper, turn the ignition to the "On" position without starting the engine. Press and hold the "Menu" button on the radio or dashboard until the display shows the time settings. Use the volume knob or the tuning buttons to adjust the hours and minutes, then confirm the settings by pressing the "Menu" button again. Finally, turn off the ignition to save your changes.
You can set the timing on the Citroen boxer hdi 2 2 turbo 03 plate by using the clock dock.
You will need both hands to set the clock in the 2007 Chrysler 300. Hold the power button in and adjusts the time with the tuning knob.
To set the clock on a 2007 Honda Jazz, start by turning the ignition switch to the "On" position without starting the engine. Press and hold the "Clock" button until the display begins to blink. Use the "H" and "M" buttons to adjust the hours and minutes, respectively. Once the correct time is displayed, press the "Clock" button again to set it.
Your owners manual has all the info you need on that.
get out your owners manual and it will tell you how to do it.
August 31st, 2007.
To set the clock on a 2007 Harley Davidson, first, turn the ignition switch to the "On" position without starting the engine. Press and hold the "Clock" button until the hours begin to blink, then use the "Set" button to adjust the hours. After setting the hours, press the "Clock" button again to switch to minutes and adjust them using the "Set" button. Finally, press the "Clock" button once more to save your settings.
To set the clock on a 2007 Dodge Caliber, turn the ignition to the "On" position without starting the engine. Press and hold the "Hour" button to adjust the hour, and the "Minute" button to set the minutes. Once the correct time is displayed, release the buttons, and the clock will automatically save the settings.
How do you set the clock in 2007 equinox..Take it off military time
To set the clock on a 2007 Honda Fit, first turn on the ignition or accessory mode. Press and hold the "Clock" button until the display begins to blink. Use the "H" (hour) and "M" (minute) buttons to adjust the time, then press the "Clock" button again to save the settings. Make sure to set the correct AM or PM as needed.
There is a time set right above hazzard light
There are two buttons right next to the clock. One for the hours and another one for the minutes. Set it from there and your problem should be solved! Hope that helps...