The distributor is synched to zero with a scan tool, it can not be done with a timing light.
timing marks dodge 2.2 engine how to set them
The distributor is set to 0 deg with the scan tool. It is not possible to set it with a timing light.
The distributor is synched to zero degrees with a scan tool.
It is not "adjustable". It is set to 0 degrees with the aid of a scan tool It is not done with a timing light.
all jeep engines in 1993 have computer controlled timming. non adjustable
set timing on 1991 c2500 5.7 liter
how to set timmin chain 1992 Nissan for a 2.4liter
For a 1988 Jeep Comanche with a 2.5-liter engine, the timing marks are typically located on the crankshaft pulley and the timing cover. The crankshaft pulley has a notch or mark that aligns with a corresponding mark on the timing cover. To set the correct timing, the engine should be at top dead center (TDC) on the compression stroke for cylinder number one. It's essential to use a timing light to ensure accurate ignition timing adjustment.
yes.
timing was set at factory,there is no adjustment. it is controlled by ecm!!
That requires an engine scanner to set the timing.
Set timing on a 2.8 liter v6