0
you must first have a timing light. you can buy them at any auto parts store. hook the cable to your first sparkplug wire on your block, #1, also one to the negative battery port, then look infront of your block where the biggest pulley is on your block, and behind it you will shine the light down there and see the timing mark, while the engine is running, and the chart on front of block. once u find it, you must loosen the distrubutor cap and rotate it in either direction to advance the timing or retard the timing. watch a video too for extra help :)
What else can I help you with?
How much horsepower did the 1984 Chevrolet pickup truck with the 454 come with?
The 1984 Chevrolet pickup truck with the 454 engine produced around 230-240 horsepower.
How do you chance timing chain on 1984 Mazda b-2000 where are the timing marks?
where are the timing marks on a 1984 mazda b-2000 pickup?
Can you swap the engine from a 1988 Nissan pickup to a 1984 Nissan pickup?
no 84 and 85 swap out.
How do you reset timing for a 1984 Oldsmobile V6 engine?
Timing gun
What is the ignition timing for 1984 Toyota Pickup?
Should be 8 to 10 degrees before TDC
What is the standard engine in a 1984 Chevrolet Corvette?
5.7L 350
What is the timing for a 1984 454 eng.?
The correct timing for a Chevrolet 454 engine made in 1984 is 4 degrees before top dead center with the idle speed set at 600 Rpm's, the distributor vacuum hose disconnected and plugged, and all accessories like the A/C turned off.
What is the timing setting on a 1984 305?
The timing setting for a 1984 Chevrolet 305 engine typically requires a base timing of 8 degrees BTDC (Before Top Dead Center) when set at idle with the engine running. It's important to ensure that the engine is fully warmed up and that the timing is adjusted with any vacuum advance disconnected. Always refer to the specific service manual for your vehicle for precise specifications, as variations may exist based on specific configurations or emissions equipment.
How do you check the timing for a 1984 volkswagen vanagon?
Timing light. The instructions are on the engine hood.
What is the curb weight of a 1984 Chevrolet C20 pickup?
On the papers mine said 3200kg, so I think roughly 7000lbs.
What socket is needed for the front axle nut for the hub assembly on a 1984 Chevy pickup?
A 11/16 socket is needed to remove the 1984 Chevrolet pickup front axle hub assembly. The socket should be a five-point socket.
What kind of engine does a 1984 Chevrolet Silverado have?
It is most likely a straight 6
