about 71mph. better then the cr85 expert
To remove the rear axle on a Suzuki Quadrunner 250, first, ensure the vehicle is on a stable surface and secure it with a stand. Remove the rear wheel by loosening the axle nut and any retaining bolts, then slide the wheel off the axle. Next, support the rear of the ATV, remove any necessary components like the brake caliper or chain, and finally, use a wrench to remove the axle nut on the opposite side. Once the nut is removed, you can slide the axle out from the swingarm.
2200 ml
over 9,000 mph
2200ml should be rigght by oil dip stick!
they make a fork to put in between the transmission and the cv axle that attaches to a slide hammer, supporting the cv axle and using the slide hammer the axle should pop out (note I have seen the fork damage the housing of the cv axle if it is a very stumbern fit).
measure center axle to center axle
whats is ltz chevrolet suburban
Remove the center cap, washers and C-clip and the wheel should slide off.
sterling 10.5 ?
To remove the axle from the hub, you will need to first loosen the axle nut using a wrench. Once the nut is removed, you can slide the axle out of the hub by gently pulling it. Be careful not to damage the threads or the axle during this process.
the repair of axle depends on what is wrong with it need more information on problem