To troubleshoot an electric cooling fan switch, first, check for any blown fuses related to the cooling system. Next, use a multimeter to test the switch for continuity; if there's no continuity when the switch is activated, it may need replacement. Additionally, inspect the wiring and connectors for damage or corrosion that could affect the switch's operation. Finally, verify that the cooling fan itself is functional by testing it directly with a power source.
it is on the thermostat housing
The cooling fan relay switch can be located on the back of the cooling fan motor. The relay switch should be labeled as such.
where is cooling fan relay switch located on 2000 s-type jaguar
The 1996 Mercury cooling fan relay switch is on the back of the cooling fan motor. The relay switch should be labeled as such.
The 2004 Dodge Intrepid cooling fan relay switch can be found on the back of the cooling fan motor. The cooling fan relay switch is attached to the fan motor with two retaining screws.
Air not properly purged out of the cooling system, bad electric cooling fan switch(s) in the block, bad connections on the block fan switches.
To troubleshoot a malfunctioning fan switch on your furnace, first check if the switch is set to the correct setting. Next, inspect the wiring and connections to ensure they are secure and not damaged. If the switch still does not work, it may need to be replaced by a professional technician.
one word dealership....
The cooling fan is operated by an electric motor rather than the revolutions of the car's motor. If your fan is staying on I would investigate the electrical systems leading to the fan, if the key is in the on position it is probably allowing power to pass to the electric motor. Otherwise there may be some short in a switch that is meant to shut it off.
Your cooling fan switch is located right behind the electronic distributor mounted on the 3/4 inch metal tube going to the firewall. There are two sensors a two wire and a single. The two wire is for the electric fan and the single is for the temp gauge.
To turn the electric cooling fan on to provide additional air flow to the engine to aid in keeping vehicle's operating temperature within recommended limits
The cooling fan relay switch can be found on the inside front quarter panel. The relay switch will be on the drivers side quarter panel.