you cant
How do you change the battery in mazda 5 key?
Mazda Key Replacement Austin works with many Mazda models, including the Mazda 2, Mazda 3, Mazda 323, Mazda 6, Mazda 626, Mazda CX-3, Mazda CX-5, Mazda CX-7, Mazda CX-9, Mazda MX-5, Mazda BT-50, and Mazda Astina Therefore, we promise to assist you with your Mazda locksmith needs 24 hours a day, seven days a week, regardless of the model you own. We can also make new Mazda keys late at night or in any emergency or rekey your Mazda ignition switch. We do Mazda key cutting on the spot in Austin, TX. We can have you in and out quickly in need of Mazda key programming or if the Mazda key is lost. We're the top-notch Mazda key technicians in Austin, TX.
967430
Hold the fn key down for 5-10 seconds
u need to masturbate 5 times to get the key . .seriously
To program a key for a 2007 Mazda 3, you'll need a working key and the new key you want to program. Insert the working key into the ignition and turn it to the "On" position without starting the engine, then turn it back to "Off." Remove the key and insert the new key, turning it to the "On" position within 5 seconds. The security light should blink, indicating successful programming; if not, repeat the process.
Sounds like you've got a key with a chip in it. Must be programmed and copied at a Mazda dealer. Not cheap, either.
Take all keys to dealership service dept.
The new device can be purchased online for about $5 and sends an electromagnetic pulse through a car's key area to unlock the vehicle.
I Just reach lv 5
mazda premacy is the same as mazda 5 , so will fit to mazda 3,mazda 5, mazda 6 ,etc etc 5 lug 4,5 inch or 5x 114,3 mm. high posite offste.
This is how to program a Mazda protege keyless (also works with other Mazda models) remote system: 1. Open Drivers door and leave open. 2. Lock and unlock the drivers door using the power lock switch on door panel. (not sure if this is required) 3. Insert key into the ignition. 4. Turn key to the ON and OFF position 3 times in 10 seconds. Leave key in ignition. ( i have seen others say 24 seconds for 4 & 5 combined) 5. Open and close drivers door 3 times ending with door in the open position. (you can depress the door switch instead) 6. Door locks should respond by locking and unlocking. 7. Press any button on remote 2 times. Doors should lock and unlock. 8. If programming a second remote press any button 2 times on it and door locks should cycle again. 9. Remove key from ignition and door locks will cycle again. 10. Test remotes. This information was received from: How do you program a keyless entry remote for your Mazda 5