answersLogoWhite

0

take off the tire and just pull the rotor off it might take so pounding but it will just slide off

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

What overdrive transmission does a 1992 Chevrolet C3500 have?

The overdrive transmission that a 1992 Chevrolet C3500 would have is a 4L80E. It is a series of automatic transmissions from General Motors.


Will the suspension out of a 91 c3500 silverado fit into a 93 c3500 chassis?

IT sure will. It is the same.


What is the difference between a 1998 GMC Sierra C3500 and a 1998 GMC Sierra K3500?

The C3500 is rear wheel drive. The K3500 is 4 wheel drive.


Will a 1998 c1500 door fit a 2000 c3500?

No


How much oil for a C3500 turbo diesel?

11 qts


How much does a 2007 GMC C4500 Pickup cost?

I could not find a C4500 GMC in the Kelly Blue Book only the Sierra C3500 and depending on if it is a dealer or private party and options and milage the prics goes from 8300 for 'fair' condition to 10,100 for excellant condition.


What is the difference Chevy K3500 and C3500 truck?

c=2wd k=4wd


What is dtc c3500 plus p1486 on Isuzu 3lt turbo diesel?

it is a type of engine


What hose is the thermostat located in on a Chevy c3500 truck?

Need to know engine size and year.


What auto transmission is in a 1992 Chevy c3500 4x2 truck with a 350 engine?

The 4L80E transmission


What is the spark plug gap for a 2000 GMC c3500 7.4liter?

The spark plug gap for a 2000 GMC c3500 with a 7.4 liter engine should be set at .045 inches. New spark plugs should not need to be gapped as they come preset from the factory.


How do you change out the ring and pinion on a c3500 truck?

To change the ring and pinion on a C3500 truck, first, lift the rear of the vehicle and secure it on jack stands. Remove the differential cover and drain the fluid, then unbolt and remove the old ring and pinion gears from the differential case. Install the new ring gear onto the differential case, ensuring it is properly torqued, and then install the pinion gear, adjusting the backlash and preload according to the manufacturer's specifications. Finally, reassemble the differential, replace the fluid, and test drive to ensure proper operation.