The fuel system of the car engine accelerates gas from the tank of gas which then mixes with fresh air. This mixture then travels comfortably through the cylinder. The Fuel is delivered in three common ways namely, car buretion, port fuel injection and direct fuel injection.
Oil plays a pivotal role in lubricating the engine and its different parts. This lubrication system helps every single part of the machine and makes sure that they are moving smoothly.
If the engine was void of any oil it would seize in the matter of minutes and yes the car would not work.
what is a good engine oil to use in my car
Work lots of over time to pay for a engine overhaul or junk the car and buy another car then check the oil once in a while.
An oil leak is always going to be out of the engine as the engine contains oil and the car does not. I think you are saying you are loosing oil with no apparent leak. If that is the case the engine is burning oil and that is why you see no leaks.
An oil catch can functions by allowing oil to pass through the spout, without allowing the vapors caused by the oil, to flow into and around the engine of the car.
It is burned by the engine combustion process or it is leaking out of the engine.
You probably spilled some oil on or near the engine, making it burn when the engine heats up.
no you check your oil with car off easier when car is cooled off
can a 302omc engine work for a car
it is just 30 weight oil with no detergent so it will work but its not good for the motor in the long run
The engine oil pan helps in storing extra oil for the car engine. This stored oil can be used for lubricating the engine. The oil pan is placed at the end of the engine. Generally you will find two types of oil pan, namely dry and wet pan. It also helps in covering the bottom area of the car engine.
On a 1991 Lincoln Town Car , 302 cubic inch V8 engine : The engine oil pump is INSIDE the engine oil pan bolted to the bottom of the engine block