12000
Assuming you are referring to air conditioning, and not a ton of coal or a ton of plutonium, then 1 ton of air conditioning equivalent = 12 000 BTU.
Assuming you are referring to air conditioning, and not a ton of coal or a ton of plutonium, then 1 ton of air conditioning equivalent = 12 000 BTU.
One ton of cooling capacity is equivalent to 12,000 British Thermal Units (BTU) per hour. This measurement is commonly used in the heating, ventilation, and air conditioning (HVAC) industry to denote the cooling power of air conditioning units. Thus, if you have a system rated at one ton, it can remove 12,000 BTU of heat from a space each hour.
One ton of air conditioning capacity is equivalent to 12,000 British Thermal Units (BTU) per hour. A 3-ton air conditioning unit therefore has a cooling capacity of 36,000 BTU per hour.
Two tons. 24 in model number is 24000 btu, there is 12,000 btu per ton.
Well, honey, a 2 horsepower air conditioner typically produces around 24,000 BTUs per hour. So, if you're looking to cool things down, just remember that number and you'll be good to go. Just don't expect it to make you any cooler than Betty White in a snowstorm.
1 hp=12K BTU
Well, isn't that a happy little question! In the world of air conditioning, 1 BTU is equal to 0.29307107 watts. So, if you have 12,000 BTU, you can convert that to approximately 3,516.853 watts. Keep on painting with those numbers, my friend!
There are 12,000 British Thermal Units (BTU) in a ton of refrigeration (1 ton of refrigeration = 12,000 BTU/h). This measure is commonly used in the refrigeration industry to quantify the cooling capacity of a system.
The size of the unit in btu does not affect the system efficiency. The way a unit is built and matched to an evaporator determines its' maximum efficiency. An oversized unit affects the comfort level in the home because it will not have a long enough run cycle to adequately remove humidity.
A British Thermal Unit (Btu) is a unit of measurement used to quantify energy. When referring to air conditioning systems, the cooling capacity is often measured in Btu per hour, with one ton of cooling equivalent to 12,000 Btu per hour.