The cost to modify your vehicle will depend greatly on the type and brand of keyless entry you choose. A simple set up will run about $150 for the install, to upwards of $500.
How to Install a Remote Keyless Entry System in a Truck By eHow Cars Editor When you install a remote keyless entry system in your truck yourself, you get the convenience and security of a keyless entry system without the additional cost of an installation by a third party. In addition, you will have the satisfaction of having accomplished the task yourself. Things You'll Need: · Truck · Keyless entry system1. First, find the right keyless entry system for your needs. Consult your dealer and the truck's manufacturer to find out which systems are compatible with your truck (or how to get the factory installation kit). 2. Shop around locally. Many dealers or auto parts stores will order the kit for you, or direct you to a local store that will have the kit you are looking for. 3. Ask for advice. Every truck is different, and every keyless entry system is different. Gather as much information from instruction books and friendly mechanics as possible. 4. Shop online. When you know the exact kit or piece of equipment you need to complete your keyless entry kit, you can often find it at a bargain from online vendors. 5. Buy a kit and install it. If you are not particularly mechanically inclined, there are keyless-entry kits available for purchase. All you'll need are some basic tools (such as a screwdriver or socket wrench) and the included instruction manual.
Each vehicle is provided with a default code that is normally in your owners manual that came with your vehicle. If you do not have this, you may need to contact a ford dealership to find out how to get the information you need to add or change your personal code entry.
about £5
Add on power lock servo's can be purchased to work with any alarm system, just follow the installation instructions with the alarm system and your classic pony will jump into the 21st century.
How much it would cost to add Freon to your refrigerator will vary based on several factors. The cost is determined by your supplier and the amount required with the average cost is being about $8.
$560.00
no you will have to keep your stock secuirty module but get you the remote keyless entry module from a truck that was equiped be sure if you have a 2 door truck get it from a 2 door or etc as the wiring harness will be different you will also need the wiring harness from that same truck you pulled the module from you have to pull the dash an heater core box big job its ALOT easier to get an aftermarket system an install
it will cost $900,000,000,000,000 to buy the sidekick and add it to a family plan
It is a single wire GM system. You have to connect the white wire (of the master switch) to the green wire(keyless system) then solder a 1.5 Ohm resistor to the white (master switch) wire which is then connected to the resistor the other end of the resistor is connected to the yellow wire(keyless system). ______white_______Green_______>Resistor 1.5K_________yellow
A lot!
alot
"Entry" would be a class, "add", "delete" and "modify' methods.