Remove the pilot assembly from the furnace and clean it up. You need to be careful when putting it back on at the gas valve so as not to crossthread the screw. Take a thin wire and clean the pilot orifice, then use a brush or sandpaper on the thermocouple.
How do I light pilot light on furnace
The furnace pilot may not stay lit due to issues with the thermocouple, gas supply, or a dirty pilot light. It is important to check and potentially replace the thermocouple, ensure proper gas flow, and clean the pilot light to resolve the issue.
its in the pilot lamp.. you need to slide the orifice out of there to clean or replace every so often
It's not necessary to clean it. If by any chance you have a problem and THINK you need to clean it, it's more likely the thermocouple is acting up and needs to be replaced.
Not all furnaces have pilot lights. Modern furnaces often use electronic ignition systems instead. Check your furnace's manual or contact a professional to determine if your furnace has a pilot light.
The furnace pilot light may not be working due to issues such as a clogged pilot orifice, a faulty thermocouple, or a gas supply problem. It is important to troubleshoot and address these issues promptly to ensure the furnace functions properly.
The pilot light in your furnace may not stay lit due to issues with the thermocouple, gas supply, or a dirty pilot assembly. It is important to have a professional inspect and repair the furnace to ensure safe and efficient operation.
If the pilot light goes out on a furnace, the furnace will not be able to ignite and produce heat. To relight the pilot light, you can follow the manufacturer's instructions provided in the furnace manual. Typically, this involves turning off the gas supply, waiting for the gas to dissipate, and then using a long lighter or match to relight the pilot light.
No standing pilot, it is a spark ignition unit
At pilot light, pilot light flows around thermocouple.
For one to maintain a good furnace, one must: clean the furnace regularly, replace or clean the filter, service the furnace once or twice a year, make sure that the furnace is kept clean and dry to name a few.
The pilot light in your furnace is typically located near the bottom of the furnace, usually behind a small access panel. It is a small flame that ignites the gas to start the heating process.