0
There are four Philips screws holding the upper dashboard to the car frame, loosen both and remove. Then remove the lower part, it is kept in place by six similar screws. Three of four screws at the top of the Instrument panel shroud should be removed. Remove the screws and the shroud. You will probably have to remove both the upper and lower dash covers. Then look for 4-5 screws holding the instrument cluster in. It may be necessary to loosen the steering column also, held in place by several bolts.
What else can I help you with?
What is a good brand of pickup truck?
Toyota actually makes the top pickup truck right now.
How do you replace the windshield wipers on a 1992 Toyota pickup truck?
replaceing windshield wipers toyota truck
Where is the fuel filter located on a four cylinder 1995 Toyota pickup truck?
The fuel filter is located on the firewall on a four cylinder 1995 Toyota pickup truck!
Trans fluid for Toyota truck?
manual trans 91 Toyota pickup?
What pickup truck models does Toyota currently make?
Toyota currently makes two different models of pickup trucks. These are the Toyota Tocoma and the Toyota Tundra.
How do you change the front brakes on a 1991 Toyota pickup truck?
changing front brake pads on 1991 Toyota truck
Where is it on a Toyota tocoma 2000?
Where is the fuel filter located on a 2000 toyota tocoma pickup truck
How popular is the Toyota Tacoma?
The Toyota Tacoma is a fairly popular pickup truck. The Tundra may be slightly more popular full-size truck.
What fuse does the horn on a 1987 Toyota pickup truck use?
15 amp..
Where is the fuel relay on 1991 Toyota pickup truck?
On a 1991 Toyota pickup truck, the fuel relay is typically located in the fuse box under the dashboard on the driver's side. It's often labeled as the fuel pump relay. To access it, you may need to remove the cover of the fuse box, which can be found near the steering column. Always refer to the owner's manual for the exact location and identification of the relay.
Where is the OBD ii port located on a 1997 Toyota T 100 pick-up truck?
The OBD II port on a 1997 Toyota T100 pickup truck is typically located under the dashboard, near the driver's side. Specifically, it can be found to the left of the steering column, close to where the steering wheel meets the dashboard. You may need to remove a cover or look closely to spot it, as it can be somewhat hidden.
The truck doesn't go into gear What are my options for the problems?
The truck is a 1988 Toyota pickup with a four speed transmission.
