answersLogoWhite

0

Very easily done. The thermostat is located on the left front part of the engine connected to a hose coming from the radiator. It is held on by (2) torx head bolts. The plastic shroud above it will need to be removed first, but that too is very easy. After letting the engine cool down completely, remove the bolts and shift the thermostat housing cover out of the way. Take out the old thermostat with your fingers and replace with the new one. You should replace the gasket as well. The thermostat and gasket will set you back about $10 from any auto parts store. The entire process should take less than 30 minutes. Good luck.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How to replace cigar lighter on 2001 Volvo s40?

== == This is a link to the 2001 Volvo S40 Operation and Care Manual: http://new.volvocars.com/ownersdocs/2001/2001_SV40/01sv40_06b.htm#pg94 It may require you to register.


How do you add coolant on a Volvo s40?

Where is the radiator cap on a 2001 Volvo s40?


Volvo S40 common problems?

Thermostat and thermostat sensor (ect) bad


How do you change the in dash push in cup holder on a 2001 S40 Volvo?

WHERE DO YOU GET A REPLACEMENT IN DASH PUSH IN CUP HOLDER FOR THE 2001 S40 VOLVO? FIRST :) I already have the new cup holder from Volvo! How do I replace it? You have the actual guestion listed, now where do I find the answer????


Where are the timing marks on the 2001 Volvo S40?

The timing marks on your 2001 Volvo S40 can be found on the outside of the main pulley. The timing marks will be scattered around the edge of the pulley.


Does the 2001 S40 Volvo have anti lock brakes?

Yes


What vehicle does air filter SA3901 go in?

2001 volvo s40


Which Tires for Volvo S40?

Which Tires for volvo S40?


Where is the coolant temperature sensor located on a 2003 volvo s40?

Next to the thermostat. you will see it when you remove the hose


How do you replace a wheel bearing on a 2007 Volvo s40?

To replace a wheel bearing on a 2007 Volvo S40 you need to remove the caliper bolts first and then extract the car's rotor. Then you must put the new bearing on the knuckle.


What is Code 128 for Volvo S40?

I'm not sure what you're asking, but if you mean that you are getting an OBD-II diagnostic code of P0128 from your Volvo S40, that code corresponds to a problem with coolant temperature. On a first generation Volvo s40 (99-04), this usually means that the thermostat or electronic coolant temperature sensor are malfuctioning or have failed.


How do you remove washer bottle on Volvo s40?

How do i remove the washer bottle from a volvo s40